Power Transmission Company
1. Portability
Modular offices and guard booths can be fabricated and put together on a steel base or installed panel by panel on-site on a concrete slab. If the customer uses a steel base for the structure, the building can be forklifted wherever it is needed to be transported to, or multiple forklifts can place it on a truck to have it moved to another location.
If your building will need to be moved frequently, there can be a modular structure located atop a trailer system. Used in many instances at airports, military facilities, and correctional facilities, these trailer mounted buildings allow personnel to transport their workstation at a moment’s notice. These buildings save time with their hypermobility, and money by eliminating the need for multiple workstations.
2. Decreased Site Downtime
Every facility is required to be up and running in order for the company to be making money. That means every second that regular operations are not taking place, the company is losing money. Luckily, with modular construction that amount of downtime can be minimized, if not eliminated completely. For a panelized modular office system, in most cases, no heavy machinery should be needed to set up the office complex. This not only will make scheduling easier but will allow your facility to operate without having to divert work processes around the equipment.
3. Quicker Tax Depreciation on the Structure
Section 179 – Applicable purchases of $500,000 in equipment can now be written off during the tax year they are purchased and put to use. In contrast, conventional building methods, or “stick built” construction techniques must be depreciated over the course of 39.5 years. In general, by definition, our wall systems are considered equipment and depreciates accordingly. Thus, allowing a company to completely write off the expenditure over 5 times faster than typical construction. With current tax laws, the bottom line is that conventional construction’s initial cost would need to be over 32% less to match the tax advantages of Panel Built’s product.
4. Minimal Clean-Up
Since these structures are prefabricated in a modular construction facility, the job site will not require many custom cuts or adjustments in order to erect the structure. This will allow the structure to be fully installed in the facility with little to no on-site construction, so that means no sawdust and any other wastes to clean up after the project is over. With less clean up, your facility will save that extra time, plus there will be an overall lower effect on the facility’s productivity and downtime.
5. Shorter Project Times
With modular construction, the structure will be fabricated in our modular construction facility while the project job site will be prepping for the installation of the structure. In a traditional construction environment, these two processes will happen one after the other, but with modular construction, they can happen concurrently. Ultimately, by being able to do both at the same time, modular construction projects can reduce project lead times up to 50% in comparison to stick-built.
6. Reusable Materials
If you need to make adjustments to one of the modular office buildings, you do not have to buy a completely new structure, there are countless projects where they went back into their customer’s facilities and added onto a pre-existing modular office because they had outgrown their previous one.
Modular offices provide incredible flexibility for companies like these that are seeing a large amount of growth and will need ever-changing space needs over an extended period of time. Similarly, our mezzanine systems can be disassembled and reassembled in another area, or they can be extended by adding onto the structure.
7. Standardization
Through the process of standardization, modular construction ensures each one of our modules and panels meets the same standards and codes as the one that came before it. This standardization is done in order to ensure the highest level, compatibility, repeatability and safety is used to fabricate each and every panel and structure. This process is easier to accomplish in a modular construction environment because of the factory-like facility that is used to manufacture the building.
For a traditional stick-built structure, not all structures are built by workers with the same set of skills or understanding of their building process. However, modular construction’s factory environment ensures each worker performs a specific task in the building process that they have been trained on time and time again by making coordinated and consistent, value-added work processes.
8. Versatility in Design
One of the biggest misconceptions on modular construction is the versatility in the design process. Although our modular structures are prefabricated in our facilities, the building is still designed and manufactured to our customer’s specific designs. With our binder post and panel system, structures provide a uniform design with an unlimited number of layout options. This versatility allows you to streamline the design process. Even for structures that were designed for stick-built construction, the layout can easily be converted to one of our modular, panelized structures.
9. Safety
Similarly, to points 2 (Decreased Site Downtime) and 4 (Minimal Clean Up), the safety seen in a modular construction site is vastly different than traditional construction. With the reduction of the amount of heavy equipment, power tools, etc., there are far fewer hazards to incur on the job site.
Also, for the pre-assembled buildings, the entire structure will be delivered to your facility already put together, meaning all that would be left is anchoring and electrical and data hookups. This will require far less traffic in the job area, and allows all the installers to focus on one large object (the building) rather than a lot of smaller things.
10. Structure Durability
For pre-assembled buildings, before they are installed at the job site, they must travel from a manufacturing facility. This means the structure will be wrapped to protect it from debris, forklifted onto the back of a flatbed truck, and then will travel, sometimes across the United States. This journey will not typically be a gentle ride with perfect road conditions.
So, in order to ensure that the buildings make it to the job site in the best possible condition, they're designed to be able to withstand the rigors of transportation. Therefore, modular buildings must inherently be built stronger in order for them to retain their structural integrity through and after transportation.
11. Weather Conditions
Because the buildings are constructed in a factory in assembly-line style, modular structures do not incur the same weather conditions or problems whenever it is being constructed. Probably the biggest of all of these is the damage to materials used in the project. Since the exterior buildings are often completely constructed before they see the outside world, they will already be sealed and weatherproofed before they come into contact with any type of precipitation. In addition, when a traditional building would have weather delays during the construction of the building, modular construction will not have these days, saving time and money at the same time.
Contact us today to learn more.
